Wireless - Teradek Bolt 6 LT

The Bolt 6 LT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 milliseconds using the set’s included Bolt 6 LT video Transmitter and Receiver.

Key features of the Bolt 6 LT Set include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.

Bolt 6 also offers new tools for high-end users, including better visibility over connections and signals, adding confidence to the workflow no matter how challenging the environment. It additionally gives you access to our new Long Range Mode, offering better video quality at longer distances. A 5-pin USB adapter, sold separately, allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors.

Teradek Bolt 6 LT  Kit:

  • Bolt 6 Transmitter
  • 2 x Bolt 6 Receivers
  • 6 x Short BNC Cables
  • 3 x Noga Arms
  • 3 x 2 Pin to 2 Pin Lemo Power Cables
  • 3 x SafeTap D-Tap to 2 Pin Lemo Power Cables

Bolt 6 LT 750 TX

Video Inputs
  • 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
  • 1 x HDMI 1.4b Type-A receptacle
Video Outputs
  • 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
SDI Ancillary Data Support
  • Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling
  • SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Delay Tx To Rx
  • <0.001sec
Input Cross Conversion
  • Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout)
Supported Resolutions
  • 4Kp23.98/24/25/29.97/30 (HDMI only)
  • 1080p23.98/24/25/29.97/30/50/59.94/60
  • 1080psf23.98/24/25/29.97/30
  • 1080i50/59.94/60
  • 720p50/59.94/60
  • 480p59.94 576p50
  • 480i(NTSC)/576i(PAL)
Video Compression
  • Visually Lossless
Color Correction
  • None
Audio Compression
  • 48kHz 24-bit PCM
Audio Input
  • Embedded SDI/HDMI Audio Input (2 Channel)
Dimensions
  • 60mm x 103mm x 33mm
Weight
  • 206g (7.3oz)
Construction
  • Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability
  • Multiple mounting options with 1/4"x20 and M3 holes
Configuration Interfaces
  • OSD with Menu, Joystick Navigation
Switches
  • On/Off Switch
Mobile App
  • Bolt App
Desktop App
  • Bolt Manager application for OSX & Windows
Usb Interface Functionality
  • Upgrade via Micro-USB
Bluetooth
  • 2.4 GHz

Antennas

  • 2 External 2dBi antennas (included)
Wireless
  • Non-DFS Frequencies:
  • 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
  • DFS Frequencies:
  • 5.270 ~ 5.670 GHz
Rf Channel Selection
  • Auto, Manual
Encryption
  • AES-256, RSA-1024 key exchange
Rf Power
  • 23 dbm EIRP
Range
  • Up to 750 ft, line of sight
Unicast Multicast
  • Can connect one Transmitter to up to 6 Receivers
Noise Rejection
  • Can coexist with WiFi and 5GHz cordless phones
  • Can operate up to 6 sets in same location
Interoperability
  • Can transmit wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
Power Input
  • 2-Pin Circular locking Connector 6-28 VDC
Battery
  • None, optional Sony/Canon dual battery plate
Nominal Power Consumption
  • 9 Watts
Operating Temperature
  • 0-40℃

Bolt 6 LT 750 RX

Video Outputs
  • 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
  • 1 x HDMI 1.4b Type-A receptacle
SDI Ancillary Data Support
  • Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling
  • SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Output Video Scaling
  • No manual settings, but all signals above 4K30 for HDMI and 1080p60 for SDI are scaled down to 1080p for corresponding output
Supported Resolutions
  • 4Kp23.98/24/25/29.97/30 (HDMI only)
  • 1080p23.98/24/25/29.97/30/50/59.94/60
  • 1080psf23.98/24/25/29.97/30
  • 1080i50/59.94/60
  • 720p50/59.94/60
  • 480p59.94 576p50
  • 480i(NTSC)/576i(PAL)
Video Compression
  • Visually Lossless
Test Pattern Generator Support
  • Yes
Spectrum Analyzer
  • Yes
Color Correction
  • 17x17x17 3D LUT (supports 10-bit color)
Audio Compression
  • 48kHz 24-bit PCM
Audio Output
  • Embedded SDI/HDMI Audio Output (2 Channel)
Dimensions
  • 122mm x 94mm x 27mm
Weight
  • 292g (10.3oz)
Construction
  • Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability
  • Multiple mounting options with 1/4"x20 and 3/8"x16 holes
Configuration Interfaces
  • OSD with Menu, Joystick Navigation
Switches
  • On/Off Switch
Mobile App
  • Bolt App
Desktop App
  • Bolt Manager application for OSX & Windows
USB Interface Functionality
  • Upgrade via Micro-USB
Bluetooth
  • 2.4 GHz
Antennas
  • 5 External 2 dBi antennas (included)
Wireless
  • Non-DFS Frequencies:
  • 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
  • DFS Frequencies:
  • 5.270 ~ 5.670 GHz
Rf Channel Selection
  • Auto, Manual
Encryption
  • AES-256, RSA-1024 key exchange
Rf Power
  • 21 dbm EIRP
Range
  • Up to 750 ft, line of sight
Unicast Multicast
  • Can connect one Transmitter to up to 6 Receivers
Noise Rejection
  • Can coexist with WiFi and 5GHz cordless phones
  • Can operate up to 6 sets in same location
Interoperability
  • Can receive wireless video from all ranges of Bolt 4K XT and Bolt 4K LT transmitters (limited by shortest range device)
Power Input
  • 2-Pin Circular locking Connector 6-28 VDC
Battery
  • None, optional Gold or V mount battery plate
Nominal Power Consumption
  • 11 Watts
Operating Temperature
  • 0-40℃

Place call to action here

Recent Work